Automatic Transfer Switch in Tana River

Heat, not height, is the constraint in Tana River. At 65 m elevation costs you only about 0%, but a design ambient of 38.4 °C — with 2025 peaking at 40.5 °C — costs roughly 5.4%. Hot air is both thinner and worse at carrying heat away, so the same machine is making less power while working harder to cool itself. That makes radiator sizing, enclosure ventilation and free air space around the set the decisions that actually determine whether it holds rated output in the afternoon, when your load is usually highest.

Marine air. On the low-lying coastal strip of Tana River, salt-laden air attacks a generator continuously whether or not it is running. Standard enclosures corrode from the inside out, alternator windings and control-panel terminations suffer first, and the damage is usually well advanced before it becomes visible. Marine-grade or upgraded enclosure treatment, sealed terminations and a shortened inspection interval are not optional extras at this exposure.

At sea level. Barometric pressure here is what the rating plate assumes, so you get the full published output — the only place in the sizing conversation where nothing is taken away. Spend the attention you would have spent on altitude on the foundation, the exhaust route and the ventilation path instead; those are what limit installations at 65 m.

Extreme heat. A design ambient above 36 °C puts this among the hardest environments in Kenya to keep a set running at rating. Standard radiator packages are frequently inadequate; high-ambient cooling packs, generous enclosure free area and shaded intake are the difference between a machine that holds load and one that shuts down on high coolant temperature in the afternoon.

Load profile. Tana River is a smaller county, and the realistic constraint is usually parts and attendance rather than capacity. Standardising on a well-supported engine family matters more here than squeezing the last percent out of a sizing calculation — a set you can get filters and a fuel pump for is worth more than a marginally better one you cannot.

Getting there. Hola lies about 347 km east of our Embakasi, Nairobi workshop in a straight line — road distance is longer. Our mobile workshop covers all 47 counties, so visits here are planned rather than improvised — we confirm the fault description in advance so the right parts travel with the engineer.

How to read these figures. Altitude and temperature are for Hola, the Tana River County headquarters — counties span wide ranges, so these are county reference points, not your site values. Derate percentages are planning indications of the order used across the industry (about 1% per 100 m above 300 m, about 2% per 5 °C above 25 °C); the governing figure is always the specific engine's derate table, which varies with aspiration and charge-air cooling. We size against that table and your measured site conditions, not against this page. Elevation: GeoNames, via the Open-Meteo Geocoding API. Temperature: Open-Meteo ERA5 reanalysis, 2025 daily maxima. Both CC BY 4.0, retrieved 2026-08-08.