Solar Spares in Kilifi

Where the sun is decides the geometry. Kilifi County lies at 3.6°S, so a fixed array here wants about 10° of tilt facing true north. That direction is not a convention, it is which side of the equator you are on, and it reverses between counties in this country. An array laid out to the wrong side of the roof loses far more than a few degrees of tilt error. A 10° floor is applied regardless, because a panel flatter than that stops shedding dust when it rains, and soiling costs more yield in most of Kenya than tilt optimisation returns.

Heat is the other half of the sizing. Modules are tested at 25 °C cell temperature, and a panel in still air runs well above ambient — around +25 °C at the cell is the usual working assumption. With a design ambient of 32 °C at Kilifi that puts cells near 57 °C, and at roughly 0.35%/°C the array gives up about 11% against its nameplate on exactly the bright, hot afternoons it was sized for. Mounting height and rear ventilation recover a real part of that; inverter placement matters for the same reason.

Marine air. On the low-lying coastal strip of Kilifi, salt-laden air attacks a generator continuously whether or not it is running. Standard enclosures corrode from the inside out, alternator windings and control-panel terminations suffer first, and the damage is usually well advanced before it becomes visible. Marine-grade or upgraded enclosure treatment, sealed terminations and a shortened inspection interval are not optional extras at this exposure.

Hot, but manageable. A design ambient between 31 and 36 °C is demanding without being exotic: standard equipment will usually cope, provided the installation does not fight it. Most of the trouble we are called to at this temperature is not the machine — it is the space around it. Recirculated hot discharge air, an undersized louvre, or plant boxed into a corner will defeat a correctly specified installation on the days it matters most.

Load profile. With over a million residents, Kilifi carries a real mix — commercial premises, institutions and light industry — and the sets we are asked about here are usually replacements rather than first installations. That changes the question: the existing cable, transfer switch and foundation usually constrain the answer more than the load calculation does, and surveying what is already there is worth more than a catalogue.

Getting there. Kilifi lies about 416 km south-east of our Embakasi, Nairobi workshop in a straight line — road distance is longer. Our mobile workshop covers all 47 counties, so work this far out is planned around parts availability: we carry the consumables and wear items for the visit rather than making a second trip for a filter.

How to read these figures. Altitude and temperature are for Kilifi, the Kilifi County headquarters — counties span wide ranges, so these are county reference points, not your site values. The figures derived from them are planning indications, not a substitute for a site survey and measured readings. Elevation: GeoNames, via the Open-Meteo Geocoding API. Temperature: Open-Meteo ERA5 reanalysis, 2025 daily maxima. Both CC BY 4.0, retrieved 2026-08-08.